P6SLite mobile APP Quick Start Guide
Part 1 【 P6SLite mobile APP Quick Start Guide 】
1,Go to the app store and download the free P6SLite app for your mobile device,available for both Android and iOS. Alternatively you can scan the QR code below to access the download page directly （ 1-1 ） .Click on either the Android OS or iPhone OS button to download the appropriate version for your device （ 1-2 ） .You can also download a Windows version to run on a Windows PC.
2, Launch the P6SLite app and following the instructions on the screen.
3. Account registration and server selection ;Users can use your e-mail to register an account level. You can also log in to the APP system directly using aTwitter account or use “Local”login.The user registration is as shown in Figure. Click on the first step in the figure, select the second step of the lnternational, and then select the third step to register. As shown in Figure, the user can select the region according to the actual geographical location. Select area (Foreign users can only register by email)
① The camera only need to connect 12V power (for WIFI wireless camera)
② ,Open APP Home page, click the icon in the upper right corner. Select “AP configure” Connect as shown in Figure 4-1. According to the prompt until the wifi search screen, select the AP at the beginning of ZWAP. If no WiFi hotspot is displayed, wait for the hotspot to start. ) Enter the hotspot password 01234567 as shown in Figure 4-2.
③ , Click on the back button APP of the mobile device to show that it is connected as shown in Figure 2-3.(Note: If the configuration fails in the interface of Figure 4-3, it will return to the interface of Figure 4-2(This indicates that your WIFI password is entered incorrectly . ); this is the wifi hotspot connection! ! !
④ , If the hotspot connection is successful, it will enter the wifi configuration mode as shown in Figure 4-4. Select the known WiFi network to configure. If the configuration succeeds, the message “Setting the device's WiFi information successful” is displayed, as shown in Figure 4-5. At this time, the APP will automatically return to the home screen asshown in Figure 4-6. The WiFi of the camera has been configured successfully.
⑤ , Click on the home page list to show the connected devices. The camera will enter the preview interface
2),QR code added(The camera has been wired to your router)
① ,Open APP Home page, click the icon in the upper right corner, select the QR code (you can also click on thesweep) as shown in Figure 4-7. QR code recognition will enter the Add Device interface as shown in Figure 4-8.
② Add a successful APP will return to the device home page interface, click the home page list to show the connected device. Will enter the camera preview interface as shown in Figure 4-9.
3),Add LAN device(The camera has been connected to the wide area network)
The camera must be connected with 12V power supply and network cable (Note:
The camera has enabled the DHCP function by default. Please ensure that your
network is normal, and the device to be added by the APP must be in the same
network environment. If it cannot be added, please check Your network is not a
product quality issue)
① Open APP Home page, click the icon in the upper right corner, and select Add LAN Device as shown in Figure 4-11.
② Click to search for the device as shown in Figure 4-12
③ As shown in Figure 4-13, click “Save” in the upper right corner of the device (the password is empty). If the application is successfully saved, the device will return to the device management interface. Click the Home page to display the connected device. Will enter the camera preview interface as shown in Figure 4-14
Open APP Home page, click the icon in the upper right corner and select “Add manually” as shown in Figure 4-15. As shown in Figure 4-16, the name can be entered according to your needs; the UID number can be found on the airframe or the outer package as shown in Figure 4-17. Note the case when entering the UID. User name and password are the default for the first time.
Complete the operation of Figure 4-16. Click Save. Adding a successful .APP will return to the device's home page. Clicking on the home page list will display the successfully connected devices. Will enter the camera preview interface as shown in Figure 4-18
5, Home page interface, real-time preview and function description
1), home icon uses as shown in Figure 5-1
Part 2 【 APP Quick button function introduction 】
1,Control zoom function:Figure 2-1
Click the on the APP interface, and the APP will pop up function button. Click + for ZOOM+,Click - for ZOOM-
2,Manual Focus ,If some scene cameras cannot complete auto focus, users can use manual focus to get a clearer image.:Figure 2-2 ,Click the on the APP interface, and the APP will pop up function button. Click + for Focus +,Click - for Focus -
3,Set and Call preset: